Frequently asked questions about swimming pool and patios enclosures:
I have an existing swimming pool, what does it involve to install Albixon retractable pool enclosure?
There are no alternations required to your existing pool. Depending on your deck, there are only specific requirements on the area where the pool enclosure rails will be installed. The concrete sub base (concrete footing) for the rails has to be strong, thick and even enough in order to assure smooth pool enclosure operations when retracting. We provide the contractors with all the required information and specifications for the job based on the selected model and dimensions of the retractable cover. We make sure that our stff or trined dealers visit our clients’ sites before the purchase and before the install of the retractable enclosure to make sure the site specifications are clear and the site is ready for the install.
Isn’t the ALBIXON low enclosure too small?
The lowest model is 32 inches (80cm) low, but it gives you 7 feet (220cm) of height for swimming in a swimming pool that is 4 to 5 feet (140cm) deep. It is more than enough for swimming. Meanwhile, the roof will be open in 95% of the usage time of the low enclosure as the inside temperature can be up to 50°C due to present greenhouse effect. The advantage of low enclosure are the aesthetics. In Europe, the trend is towards as low enclosure as possible. Please contact us to see one of our sample installs of in your area to fully understand the space that is available from the low enclosure models.
Can the enclosure get scratched?
Yes. Used materials – polycarbonate and aluminum are very resistant, anti-corrosive and durable materials; however, similar to cars, it can get scratched. Eventually, non-scratching polycarbonate can be applied for extra cost, however, it is not a common add-on.
What about condensation in the enclosure, how do I get rid of it if it occurs?
Condensation as well as vaporization occur as a natural effect that cannot be eliminated without air circulation. It is required to open the enclosure for 30 minutes every day in order to ventilate fresh air and get rid of the condensation effect. The polycarbonate is treated with special layer allowing the drops to fall and slide easily. With twin-wall polycarbonate, it is recommended to keep the enclosure open for 2 hours in order to clear the drops from the infill.
I have no place for the rail extensions, what are my options?
The front enclosure panel can be custom made to make it removable. After removing the front panel, the enclosure will stay open in the front and it won’t shorten your pool.
Is it possible to have tinted or opaque infill in the enclosure roofing?
Yes. It is possible to pick different colours as well as opacity of your future enclosure The price will differ from the standard solutions, but it will give you full privacy when using your swimming pool with closed enclosure.
How does the Albixon retractable enclosure work?
The enclosure modules have solid wheels which can easily slide on the tracks. Applied system of rails and wheels allows very smooth operation of the enclosure making it easy to open or close without use of any additional equipment or motor. As each panel has own track, it allows to move the modules independently and open the pool either completely or just partially in any position. Electric sun powered motor for automatic opening can be applied upon request.
Does the swimming pool enclosure help to keep my kids and animals safe?
Yes, because the pool enclosure comes with safety locks. Also, the material used is very durable protecting your kids or pets to fall accidentally into the swimming pool. Albixon is the only manufacturer of swimming pool enclosures to receive NSF safety certification in the world!
What are the main benefits of the swimming pool enclosure?
The benefits of Albixon retractable enclosures include safety, extending your swimming season, water purity, reduction of your costs of water treatment chemicals and water heating, and saving hours of your precious time spent on pool water cleaning and swimming pool maintenance.
Is it possible to make a custom made pool or patio enclosure ?
Yes, with our range of products, it is possible to make almost any custom enclosure to fit your needs.
May I use the pool enclosure all year round?
Yes, you can use your retractable enclosure all year round.
Can I mount the enclosure against my house wall?
Yes, we have some types of retractable enclosures which can be mounted on the wall. However, the requirements on the preparation of the site are more demanding. Also, mounting the enclosure on the house can be considered as a house extension by local authorities. Contact us for any assistance or more information on how to proceed when planning to attach the enclosure to the house.
How do I take care of the ALBIXON enclosure?
The Albixon enclosures are not demanding for maintenance. If needed, they should be washed only by water using garden hose. After the winter time, we recommend cleaning the enclosure with soupy water if it is very dirty. Please don’t use any chemical products to clean your enclosure.
What could happen if the wind is very strong?
The enclosure is equipped with wind hooks so you don’t have to worry about it. Different models are recommended to our clients based on their geographical location and local structural requirements. Models differ structurally by using different sizes of profiles and most importantly different quantity of aluminum in the profiles.
What´s the difference between compact glass and twin wall polycarbonate?
Twin wall polycarbonate is made of two panes which means better insulation of the enclosure. Compact glass is made from one thick pane making the polycarbonate sheet transparent as glass.
What´s the minimum size of one module?
The minimum module size (in length) is 4’9″. If it is a smaller module than 4’9″ it could disrupt the fluent moving. The standard size of a section is 7’2″.
What´s the enclosure made of ?
Albixon enclosure is made of 100% safe aluminum and 100% polycarbonate supplied certified manufacturers from Europe. None of our components is imported from China or non-EU countries.
How long does it take to install the enclosure ?
The installation of the standard Albixon enclosure takes around 12 hours for four people. Custom enclosures take up to seven days, however the enclosure can be pre-assembled in advance at our facilities making the final installation much shorter.
What´s the warranty and guarantee of the enclosure?
All our products come with above standard warranty. Our suppliers of the components from Germany give up to 10 year warranty on their materials. The quality of the products is guaranteed by using only certified suppliers of materials from Europe as well as certified production in the most modern facilities.